TradeAssistIQHome

Worcester Bosch Greenstar 4000 System fault 2910

Fault in flue system

Gas boiler

What it means

Fault in the flue system (V category).

Likely causes

  1. Obstructed flue
  2. Failed flue integrity
  3. Water in sump
  4. Blocked/faulty siphon
  5. Faulty ignition transformer
  6. Incorrect gas type
  7. Incorrect gas supply pressure
  8. Power supply fault
  9. Faulty electrodes/cable
  10. Faulty flue system
  11. Incorrect gas/air ratio
  12. Faulty external gas flow monitor (natural gas)
  13. Faulty burner
  14. Faulty air/gas ratio control valve
  15. Faulty gas valve
  16. Faulty seals around the burner, internal flue seals or case seals causing abnormal O2/CO2 readings
  17. Flue system integrity failure
  18. Combustion circuit fault
  19. Damaged or loose flue joints
  20. Obstructed or damaged flue terminal or terminal guard
  21. Modified flue gas system
  22. Damaged flue pipes or gaskets
  23. Leaking flue joints

Where to start

  1. Check the flue for obstructions and remove any found
  2. Check the flue integrity test
  3. Check for water in the sump and check the siphon operation

The full answer, free

  • 61 more checks in order
  • The readings and component tests from the manual
  • How to put it right, step by step
  • The manual page for this fault (page 75), right under the answer
Ask about 2910 freeCreate a free account

Safety: Isolate gas and power before you open the case. If you have been into the gas side, do a tightness test, and a combustion and flue check before you hand back. Gas Safe (UK) or RGI (Ireland) work only.

From the Worcester Bosch manual for the Greenstar 4000 System. Check the model on the data plate before you order parts.

Other Worcester Bosch Greenstar 4000 System fault codes