TradeAssistIQHome

Midea Heat pump fault C2

IBH (internal backup heater) related fault

Heat pump

What it means

C2 error occurs on units fitted with IBH (internal backup heater). The fault is associated with the IBH PCB and requires confirmation of repair before restoring the code.

Likely causes

  1. IBH PCB fault
  2. Abnormal system state detected

Where to start

  1. Navigate wired controller operation parameter menu to review live values #00 1 through #00 61
  2. Note that unavailable parameters for the given configuration will not display
  3. Follow C2 troubleshooting guide in Part 4 Diagnosis and Troubleshooting

The full answer, free

  • 5 more checks in order
  • The readings and component tests from the manual
  • How to put it right, step by step
  • The manual page for this fault (page 60), right under the answer
Ask about C2 freeCreate a free account

Safety: Isolate the outdoor unit and any backup heater, and give the inverter capacitors time to discharge before you open the electrics. Anything on the refrigerant circuit needs F-gas certification.

From the Midea manual for the Heat pump. Check the model on the data plate before you order parts.

Other Midea Heat pump fault codes