Joule Modul Air fault 32
Back up heater water heater temperature sensor error
Heat pumpWhat it means
Fault detected on the back-up heater water heater temperature sensor. This is a locking fault requiring installer intervention to override.
Likely causes
- Faulty sensor
- Sensor wiring fault
Where to start
- Check sensor
- Tap the Settings icon in the main menu
- Navigate to Tank Status and press the icon
The full answer, free
- 16 more checks in order
- The readings and component tests from the manual
- How to put it right, step by step
- The manual page for this fault (page 105), right under the answer
Safety: Isolate the outdoor unit and any backup heater, and give the inverter capacitors time to discharge before you open the electrics. Anything on the refrigerant circuit needs F-gas certification.
From the Joule manual for the Modul Air. Check the model on the data plate before you order parts.
Other Joule Modul Air fault codes
- 12No communication with the room thermostat
- 13No communication with the boiler
- 20Filter reached end of lifespan
- 30Top tank temperature sensor error
- 31Bottom tank temperature sensor error
- 35Airflow sensor error - green comfort module
- 71Over-temperature flow protection triggered
- 80No temperature difference across the condenser
- 95Water pressure is critically low (< 0.3 bar)