TradeAssistIQHome

Vokera Mynute He fault AL10

Ignition failure/not flame sensed, condense sensor activated

Gas boiler

What it means

Boiler failed to detect flame during ignition sequence, or the condensate sensor has activated.

Likely causes

  1. Ignition failure
  2. Flame not sensed
  3. Condense sensor activated

Where to start

  1. Reset the boiler
  2. Check appliance operation

The full answer, free

  • How to put it right, step by step
  • The manual page for this fault (page 28), right under the answer
Ask about AL10 freeCreate a free account

Safety: Isolate gas and power before you open the case. If you have been into the gas side, do a tightness test, and a combustion and flue check before you hand back. Gas Safe (UK) or RGI (Ireland) work only.

From the Vokera manual for the Mynute He. Check the model on the data plate before you order parts.

Other Vokera Mynute He fault codes