Stuart Turner Monsoon Professional fault E07
Pump blocked
Shower pumpWhat it means
Pump mechanism is blocked or seized, preventing normal operation.
Likely causes
- Electrical supply fault
- Pump seized
- Motor faulty
- Control panel damaged
- Debris obstructing impeller/rotor
- Water inlet pipe too small
- Bearing damaged
- Impeller damaged
- Pressure setting incorrect
- Strainer blockage
- Inlet pipe diameter too small
- Blockage in inlet/outlet pipe
- Installation max lift head exceeded
- Pump needs priming
- Water supply failed
- Pump outlet check valve stuck closed
- Inlet pipework not air tight
- Check valve faulty (debris)
- Pressure vessel charge low
- Pressure vessel damaged
- Leak in system
- Debris blockage of inlet strainer
Where to start
- Check power supply
- Check power supply cable
- Check fuse
The full answer, free
- 24 more checks in order
- The readings and component tests from the manual
- How to put it right, step by step
- The manual page for this fault (page 23), right under the answer
Safety: Isolate power and water, and prove dead before you open or test the pump.
From the Stuart Turner manual for the Monsoon Professional. Check the model on the data plate before you order parts.